Preface
Thank you for choosing the XLD-T100S Thermostatic Magnetic Stirrer.in order to obtain a better experience, please read this instruction Manual carefully and abideby the safe operation specificationslPlease keep this Instruction Manual in a safe place for referencel
Precautions
OPlease abide by relevant regulations such as safety regulations, personal safety regulationsand accident prevention requlations.
Please insert the power plug fully into the power socket. The instrument must be groundedreliably. Please do not use a power supply other than the specified one.Do not plug or unplug the pawer plug with wet hands.The level of the liquid should be 70% of the height of the container.The stirring speed should not be too fast to prevent the instrument from being damaged byiquld splashing.
The speed adjustment should be gradually adjusted from low speed to high speed. It is notallowed to start directly from the high gear, so as to avoid the stirring bar being out of synchronization and causing beating.OWhen the stirring bar is found to be beating or not stirring, please cut off the power supply tocheck whether the bottom of the beaker is flat and the position is correct. Meanwhile, pleasetest whether the current voltage is between 110V-220V+10%. Otherwise, it will appear theabove situation.
Try not to use it for a long time at one time, and use it interrittently to prolong its life.>lf you find leakage after long-term use, please check whether the power adapter is damagedbecause the voltage is directly input by the adapter, Or, check whether the line touches the lineand the insulating tube falls off due to the collision, lt is absolutely forbidden to dismmantle andrepair by yourself if you do not understand the principles of electrical engineering!ln any of the following situations, the power plug of the instrument must be unplugged:1 The instrument is in an abnormmal state,2) When the fuse is being replaced;3) When the instrument fails and cannot be used normnally;.) When the instrument is out of use for a long time and the power plug is full of dust?5 When the instrument is being moved.
This series is magnetic stirrer. A non-ferrous container should be used.Place the container with the liquid and stirring bar in the middle of the stirrer. Slowly rotatethe speed control knob to the desired stirring speed to prevent the stirring bar from deviating orstopping stirring. The shape and size of the stirring bar should match the volume of the container and of liquor.
Please cut off the power and clean the instrument after use.Olf you find that the instrument has peculiar smell or abnormal noise during use, you shouldcut off the power immediately, and then contact our After-sales Department as soon as possible
Please take appropnate precawhen handling toxic and volatile media.ODo not disassemble and adjust the parts of the instrument at will. When the spare parts aredamaged,please only use the onginal spare parts for replacement.When the instrument fails, you should cut off the power supply in time. Please contact ourcompany for maintenance quidance or return for overhaul at the first time.
Introduction
Adopting the international advanced design concept and manufacturing technology, after the continu:ous optimization of the R8D team, the multi-functional model XLD-T100S Thermostatic Magnetic Stir.rer was developed and produced. This product has the characteristics of smooth and beautiful appear.ance, low noise, stable operation, rapid heating and strong stirring force.The intelligent control systemhas program memory, matching with LCD screen and high-performance sensors, it can precisely con-trol temperature and timing. lt is easier to use, and the operation is simple and convenient.The XLD-T100S Thermostatic Magnetic Stirrer is widely used. lt is a special instrument for heatingand stirring solid-iquid mixtures in modern petroleum, chemical, medical and health, environmentaprotection, biochemical, experimental analysis, education and scientific research and so on
Functional Block Diagram
9.Warranty
The warranty period is one year (from the date the product is purchased). During the warranty periodusers can replace or repair products with quality problems with the Warranty Card and CommerciaInvoice. Except for any of the following situations.
1.The warranty period has expired;
2. The instrument is damaged due to the user's own fault;
3. The instrument is damaged due to the user's failure to operate in accordance with the instructions,4. The instrument is damaged due to exposure to radioactive or corrosive substances;5. The instrument is damaged due to the user disassembling the instrument by himself or herself orrepairing and debugging by non-company maintenance personnel.
10.Open Box to Check
Please carefully unpack and check the components of the instrument according to the List in thisnstruction Manual. lf you find any damaged or missing parts. please contact our company in time
11.List
Movel Scientific Instrument Co.,ltd is located in the center of Ningbo In 2009 years.Movel professional supply lab&Scientific instrument and medical equipment with honest and satisfied service oversea customer. Movel have strong quality control team and technical teams.We stick to the principle of quality first, service first, continuous improvement and innovations.Movel are looking for distributor and expand more our competitive price and guaranteed quality products to customer in the world..Welcome to join us.
1. who are we?
We are based in Zhejiang, China, start from 2010sell to Oceania(68.00%),Southern Europe(60.00%),Domestic Market(48.00%)
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
freezer,scale,viscometer,pet dryer,microscope
4. why should you buy from us not from other suppliers?
Movel have strong quality control team and technical teams.We stick to the principle of quality first, service first
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,FCA,CPT,DEQ,DDP,DDU,DES;
Accepted Payment Type: T/T,L/C,D/P D/A,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
){kind=link}
){kind=link}